LTD Wagon V8-302 5.0L VIN M 4-bbl HP (1984)
EXHIBIT IV - OWNER NOTIFICATION PROGRAM M49
13.
(See Exhibit IV). Install the fan shroud and coolant reservoir assembly provided in service kit part number E4GY-8L146-A.
14.
Remove and discard the existing windshield washer/radiator overflow reservoir.
15.
(See Exhibit IV). Install the new windshield washer/radiator overflow reservoir provided in service kit part number E4GY-8L146-A.
16.
(See Exhibit IV). Connect the 10 inch length of hose to the "Y" connector of the fan shroud and coolant reservoir assembly and to the windshield
washer/radiator overflow reservoir. Connect the 18 inch length of hose to the radiator filler neck.
17.
Add a 50%/50% mixture of coolant and water to the engine cooling system and to the fan shroud reservoir. Use Ford Cooling System Fluid (part
number E2FZ-19549-A or equivalent; Ford Specification ESE-M97B44-A) . Do not fill the windshield washer/radiator overflow reservoir with
coolant.
