ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Diagnosis and Testing|Removal and Installation|Spring > < Shock Absorber and Spring Assembly - Exploded View

Maverick 2005 (08.2004-)

Rear Suspension - Shock Absorber Maverick 2005 (08/2004-)
Removal and Installation

Removal and Installation

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 Jacking and Lifting.
  1. Remove the rear quarter trim panel. For additional information, refer to Section 501-05 Interior Trim and Ornamentation.
  1. Remove the upper shock absorber nuts, washer and bushing.
    • To install, tighten to 18 Nm (13 lb-ft).
  1. Remove the lower shock absorber nut, washer and bolt.
    • To install, tighten to 175 Nm (129 lb-ft).
  1. Remove the shock absorber and the bushing.
  1. To install, reverse the removal procedure.

Diagnosis and Testing|Removal and Installation|Spring > < Shock Absorber and Spring Assembly - Exploded View