ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
419-10 Multifunction Electronic Modules > < Anti-Theft Security Access

Maverick 2005 (08.2004-)

Anti-Theft - Passive - Passive Anti-Theft System (PATS) Transceiver Maverick 2005 (08/2004-)
Removal and Installation

 
Item
Part Number
Description
1
3A673
Instrument panel steering column cover
2
11582
Ignition lock cylinder
3
—
Steering column shroud screws (3 required)
4
3530
Steering column shroud (lower)
5
W707658
PATS transceiver screw
6
—
PATS transceiver electrical connector (part of 14401)
7
15607
PATS transceiver

Removal and Installation

  1. Remove the instrument panel steering column cover. For additional information, refer to Section 501-12 Instrument Panel and Console.
  1. Remove the ignition lock cylinder.
    1. Insert the ignition key into the ignition lock cylinder and turn to the ON position.
    1. Push the ignition lock cylinder release button with a suitable tool while pulling out the ignition lock cylinder.
  1. Remove the 3 screws and the lower steering column shroud.
  1. Remove the PATS transceiver screw.
  1. Remove the PATS transceiver.
    • Disconnect the electrical connector.
  1. NOTE:
    NOTE:Replacement of the PATS transceiver does not require the PATS keys to be programmed into the powertrain control module (PCM) again.
    To install, reverse the removal procedure.

419-10 Multifunction Electronic Modules > < Anti-Theft Security Access