ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Heater Core: > < A/C - Orifice Tube Replacement Service Kit|Page 6248
Page 1
background image

Heater Core: Customer Interest
Heater Core - Noise/Drone

Article No. 85-9-35

NOISE/DRONE IN HEATER CORE - 3.8L ENGINE

FORD 1984-85 THUNDERBIRD, LTD, MUSTANG

LINCOLN-MERCURY 1984-85 COUGAR, MARQUIS, CAPRI

The alternator mounting bracket brace may contact the front clamp on the engine heater tube and hose assembly. This condition may transmit a drone
noise into the heater core. Use the following procedure to service this condition.

Figure 32 - Drone Noise Rectifying Procedure

Bend the heater tube down to obtain 1/8" clearance between the clamp and the alternator brace as shown in Figure 32. If a 1/8" clearance cannot be
obtained, install a 3/8" flat washer between the bracket and the brace.
NOTE:

Only the 1984 vehicles which have been serviced per TSB Article No. 85-1-18, will be equipped with an alternator brace. All 1985 vehicles
will have the alternator brace.

OTHER APPLICABLE ARTICLES: 85-1-18
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP10151A85
TIME:

0.3 Hr. DLR. CODING: Basic Part No. 10W151 - Code: 56

All Technical Service Bulletins for Heater Core: > < A/C - Orifice Tube Replacement Service Kit|Page 6248