Midsize LTD V6-232 3.8L (1985)
Wiper Switch: Service and Repair
EXC. STA. WAG. LIFTGATE WIPER MOTOR
1.
Disconnect battery ground cable.
2.
Remove four steering column shroud attaching screws, then grasp top and bottom of shroud and separate.
3.
Using a screwdriver, disconnect wire connector from wiper switch.
4.
Remove two wiper switch attaching screws, then remove switch.
5.
Reverse procedure to install.
STA. WAG. LIFTGATE WIPER MOTOR
1.
Disconnect battery ground cable.
2.
Remove wiper switch knob, then remove two bezel retaining screws.
3.
Pull switch retainer away from instrument panel.
4.
Remove wiper switch retaining nut, then separate switch from retainer.
5.
Disconnect wire connector from wiper switch, then remove switch.
6.
Reverse procedure to install.
