ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Thermostat - 2.5L > < Cooling System Backflushing

Mondeo 1997 (08.1996-09.2000)

Engine Cooling - Thermostat—1.6L/1.8L/2.0L Mondeo 1997 (08/1996-09/2000)
Removal and Installation

Removal

  1. Drain the cooling system.
    For additional information, refer to Cooling System Draining, Filling and Bleeding in this section.

  1. Disconnect the coolant hoses.

  1. Remove the thermostat cover.
  1. Remove the thermostat.

Installation
  1. Install a new O-ring seal.

  1. Make sure the jiggle pin locates fully into the recess.

  1. To install, reverse the removal procedure.
  1. Fill the cooling system.
    For additional information, refer to Cooling System Draining, Filling and Bleeding in this section.

Thermostat - 2.5L > < Cooling System Backflushing