ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Safety Belt System > < Rear Center Safety Belt Retractor
Safety Belt System - Safety Belt Buckle and Pretensioner Mondeo 1997 (08/1996-09/2000)
Removal and Installation

Removal

  1. WARNING:
    WARNING:Never probe the electrical connectors of air bag modules or any other supplemental restraint system component. Failure to follow this instruction may result in personal injury.
    Remove the front seat. For additional information, refer to Section  501-10 Seating.

  1. CAUTION:
    CAUTION:Note the position and routing of the wiring harness to aid assembly. An incorrectly routed wiring harness may lead to the wiring harness becoming damaged on the seat mechanism.
    Detach the wiring harness from the underside of the seat.
  1. Detach the safety belt buckle pretensioner wiring harness from the conduit.

  1. Remove the safety belt buckle and pretensioner.

Installation

  1. WARNING:
    WARNING:Never probe the electrical connectors of air bag modules or any other supplemental restraint system component. Failure to follow this instruction may result in personal injury.
    To install, reverse the removal procedure.

Safety Belt System > < Rear Center Safety Belt Retractor