Removal and Installation Name Specification Inner quarter panel Reinforcement, upper wheelhouse halves Reinforcement, lower wheelhouse halves Removal | -
General note. - Before beginning the repair, remove the quarter panel.
| | -
Reinforcement, outer wheelhouse halves - Rough cut.
- Mill out the spot welds.
| | -
Outer half wheelhouse - Rough cut
- Mill out the spot welds.
| Installation | -
New part, inner quarter panel | | -
Outer half wheelhouse - Drill holes for puddle welding.
| | -
Outer half wheelhouse - Continuous MIG seam weld.
- Puddle weld.
| | -
NOTE:Before welding together, offer up and mark the close fit position of both reinforcing plates. Reinforcement, outer wheelhouse halves - Drill holes for puddle welding.
- Weld both halves together before installation.
| | -
Reinforcement, outer wheelhouse halves - Continuous MIG seam weld.
- Puddle weld.
| | |