ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Thermostat - 2.0L Duratorq-Di-TDDi (Puma) Diesel-2.0L Duratorq-TDCi (Puma) Diesel-2.2L Duratorq-TDCi (Puma) Diesel > < Thermostat - 2.5L Duratec-VE (VE6)-3.0L Duratec-SE (VE6)-3.0L Duratec-ST (VE6)

Mondeo 2001 (10.2000-02.2007)

Engine Cooling - Water Pump—1.8L Duratec-HE (MI4)/1.8L Duratec-SCi (MI4)/2.0L Duratec-HE (MI4) Mondeo 2001 (10/2000-02/2007)
Removal and Installation

Materials
Name
Specification
Merpol grease
ESE-M99M144-B 

Removal

  1. Drain the cooling system.
    For additional information, refer to Cooling System Draining, Filling and Bleeding in this section.

  1. Loosen the water pump pulley retaining bolts.
  1. Remove the accessory drive belt. For additional information, refer to Section  303-05 Accessory Drive.
  1. Lower the vehicle.
  1. Remove the water pump pulley.

  1. Remove the water pump retaining bolts and remove the water pump (coolant expansion tank removed for clarity).
    • Discard the O-ring seal.

Installation

  1. To install, reverse the removal procedure.

Thermostat - 2.0L Duratorq-Di-TDDi (Puma) Diesel-2.0L Duratorq-TDCi (Puma) Diesel-2.2L Duratorq-TDCi (Puma) Diesel > < Thermostat - 2.5L Duratec-VE (VE6)-3.0L Duratec-SE (VE6)-3.0L Duratec-ST (VE6)