ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Starter Motor - 3.0L Duratec-ST (VE6), Vehicles With: MTX-75-5-Speed Manual Transmission (MTX-75) > < Starter Motor - 2.0L Duratorq-Di-TDDi (Puma) Diesel-2.0L Duratorq-TDCi (Puma) Diesel, Vehicles With: 6-Speed Manual Transmission

Mondeo 2001 (10.2000-02.2007)

Starting System - Starter Motor—2.5L Duratec-VE (VE6), Vehicles With: 5-Speed Manual Transmission (MTX-75) Mondeo 2001 (10/2000-02/2007)
Removal and Installation

Removal

All vehicles
  1. Disconnect the battery ground cable. For additional information, refer to Section  414-01 Battery, Mounting and Cables.

  1. Remove the air cleaner outlet pipe.
    1. Disconnect the intake air bypass hose.
    1. Disconnect the positive crankcase ventilation (PCV) hoses.
    1. Detach the air cleaner outlet pipe retaining clips.

  1. Disconnect the Mass Air Flow (MAF) sensor electrical connector.

  1. Remove the air cleaner.

  1. Detach the wiring harness support bracket.
    • Detach the wiring harness retaining clips from the support bracket.
    • Remove the wiring harness support bracket retaining nuts.

  1. Disconnect the ignition switch and battery to starter motor solenoid cables.
Vehicles with manual transaxle
  1. Disconnect the reversing lamp switch electrical connector.
Vehicles with manual transaxle or 4-speed automatic transaxle
  1. Remove the starter motor retaining bolts and remove the starter motor.
Vehicles with 5-speed automatic transaxle
  1. Remove the starter motor retaining bolts and remove the starter motor.

Installation

  1. To install, reverse the removal procedure.
  1. Initialize the door window motors. For additional information, refer to Section  501-11 Glass, Frames and Mechanisms.

Starter Motor - 3.0L Duratec-ST (VE6), Vehicles With: MTX-75-5-Speed Manual Transmission (MTX-75) > < Starter Motor - 2.0L Duratorq-Di-TDDi (Puma) Diesel-2.0L Duratorq-TDCi (Puma) Diesel, Vehicles With: 6-Speed Manual Transmission