ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
303-08C Engine Emission Control - 2.0L Duratorq-Di-TDDi (Puma) Diesel-2.0L Duratorq-TDCi (Puma) Diesel-2.2L Duratorq-TDCi (Puma) > < Exhaust Gas Recirculation (EGR) Valve

Mondeo 2001 (10.2000-02.2007)

Engine Emission Control - 1.8L Duratec-HE (MI4)/2.0L Duratec-HE (MI4) - Crankcase Vent Oil Separator Mondeo 2001 (10/2000-02/2007)
Removal and Installation

Removal

  1. Remove the intake manifold. For additional information, refer to Section  303-01A Engine / 303-01B Engine / 303-01C Engine / 303-01D Engine / 303-01E Engine.

  1. Disconnect the positive crankcase ventilation (PCV) hose from the PCV valve.

  1. Remove the PCV valve from the crankcase vent oil separator.
    1. Push in the locking tangs.
    1. Twist the PCV valve to remove.

  1. Remove the crankcase vent oil separator.
    • Discard the gasket.

Installation

  1. NOTE:
    NOTE:Install a new crankcase vent oil separator gasket.
    To install, reverse the removal procedure.

303-08C Engine Emission Control - 2.0L Duratorq-Di-TDDi (Puma) Diesel-2.0L Duratorq-TDCi (Puma) Diesel-2.2L Duratorq-TDCi (Puma) > < Exhaust Gas Recirculation (EGR) Valve