ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Air Cleaner Intake Pipe - 2.5L Duratec-VE (VE6)-3.0L Duratec-SE (VE6)-2.0L Duratorq-Di-TDDi (Puma) Diesel-2.0L Duratorq-TDCi (Pu > < Intake Air Distribution and Filtering

Mondeo 2001 (10.2000-02.2007)

Intake Air Distribution and Filtering - Air Cleaner Intake Pipe—1.8L Duratec-HE (MI4)/1.8L Duratec-SCi (MI4)/2.0L Duratec-HE (MI4) Mondeo 2001 (10/2000-02/2007)
Removal and Installation

Removal
  1. Disconnect the air cleaner outlet pipe and the breather hose from the air cleaner housing.

  1. Remove the air cleaner housing.

  1. Remove the air cleaner intake pipe upper retaining bolt from the front inner fender.

  1. Remove the left-hand radiator undershield retaining screws.
  1. Remove the left-hand front road wheel. For additional information, refer to Section  204-04 Wheels and Tires.

  1. Remove the left-hand front fender splash shield.

  1. Remove the upper air cleaner intake pipe.
    • Disconnect the upper air cleaner intake pipe from the intake air resonator.
    • Disconnect the air intake tuning pipe from the upper air cleaner intake pipe.

  1. Remove the intake air resonator.

  1. Detach the fog lamp wiring harness from the lower air cleaner intake pipe (if equipped).
  1. Lower the vehicle.

  1. Remove the radiator grille.

  1. Remove the lower air cleaner intake pipe.

Installation

  1. To install, reverse the removal procedure.

Air Cleaner Intake Pipe - 2.5L Duratec-VE (VE6)-3.0L Duratec-SE (VE6)-2.0L Duratorq-Di-TDDi (Puma) Diesel-2.0L Duratorq-TDCi (Pu > < Intake Air Distribution and Filtering