General Procedures All vehicles | -
Place the vehicle on a level surface. | | -
Make sure that the tire pressures are to specification and that the vehicle is not abnormally laden. | | -
Set the measuring screen of the beam setting equipment to the correct front fog lamp adjustment setting. | Vehicles built up to 06/2003 | -
Remove the front fog lamp bezel. | | -
Adjust the front fog lamp alignment screw. | Vehicles built 06/2003 onwards | -
Adjust the front fog lamp alignment screw. | All vehicles | -
Adjust the front fog lamp so that the boundary line touches the horizontal line. | Vehicles built up to 06/2003 | -
Install the front fog lamp bezel. | |