Workshop Repair Manuals

Ford Workshop Manuals

[PREV PAGE] [NEXT PAGE]

ford Workshop Repair Guides


Mondeo 2001 (10.2000-02.2007)

Mechanical Repairs > 5 Body and Paint > 501 Body and Paint > 501-11 Glass, Frames and Mechanisms > Description and Operation > Diagnosis and Testing > General Procedures > Removal and Installation > Rear Quarter Window Glass - 4-Door-5-Door

Glass, Frames and Mechanisms - Rear Quarter Window Glass—4-Door/5-Door Mondeo 2001 (10/2000-02/2007)
Removal and Installation

Removal

  1. Lower the rear door window glass to the position shown.
  1. Remove the rear door trim panel. For additional information, refer to Section  501-05 Interior Trim and Ornamentation.

  1. Remove the rear door handle support bracket.

  1. CAUTION:
    CAUTION:Do not touch the adhesive surface as re-bonding will be impaired.
    Detach the watershield from the rear door panel.

  1. Detach the rear door window glass from the window regulator and lower the window glass to the base of the door.
    • Access the window glass retaining clip from both sides, detach the window glass retaining clip and lift the window glass.

  1. Detach the rear door glass top run from the rear door window opening.

  1. Remove the rear quarter window glass trim panel.

  1. Remove the rear quarter window glass screw cover.

  1. Remove the rear quarter window glass retaining screws.

  1. Remove the rear quarter window glass.
    • Tip the glass forwards and remove the glass from the rear door.

Installation

  1. Install the rear quarter window glass.

  1. Install the rear quarter window glass retaining screws.

  1. Install the rear quarter window glass screw cover.

  1. Install the rear quarter window glass trim panel.

  1. Attach the rear door glass top run to the rear door window opening.

  1. Install the rear door window glass.
    • Push the rear door window glass down firmly onto the rear door window regulator to engage the window glass retaining clip.

  1. CAUTION:
    CAUTION:Do not touch the adhesive surface as re-bonding will be impaired.
    Attach the watershield to the rear door panel.

  1. Install the rear door handle support bracket.
  1. Install the rear door trim panel. For additional information, refer to Section  501-05 Interior Trim and Ornamentation.

Mechanical Repairs > 5 Body and Paint > 501 Body and Paint > 501-11 Glass, Frames and Mechanisms > Description and Operation > Diagnosis and Testing > General Procedures > Removal and Installation > Rear Quarter Window Glass - 4-Door-5-Door

[PREV PAGE] [NEXT PAGE]