ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
206-05 Parking Brake and Actuation > < Brake Pads

Mondeo 2007.5 (02.2007-)

Rear Disc Brake - Brake Caliper Mondeo 2007.5 (02/2007-)
Removal and Installation

Materials
Name
Specification
Brake Fluid - Super DOT4
ESD-M6C57-A
General Equipment
Hose clamp(s)

Removal

CAUTION:
CAUTION:Refer to: Brake System Health and Safety Precautions (100-00 General Information, Description and Operation).
NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Remove the wheel and tire.
    Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation).

  1.  
    1. General Equipment: Hose clamp(s)
    1. Torque: 18 Nm
    1. Torque: 35 Nm

  1. CAUTION:
    CAUTION:Make sure that all openings are sealed.

  1. NOTE:
    NOTE:Note the position of the brake pads to aid installation.

  1. Torque: 110 Nm

Installation

  1. CAUTION:
    CAUTION:Make sure that the mating faces are clean and free of foreign material.
    CAUTION:
    CAUTION:Make sure that the clips are correctly located.
    CAUTION:
    CAUTION:Make sure that the component is not bent.
    To install, reverse the removal procedure.
  1. Depress and release the brake pedal 3 times, check the brake fluid level in the brake fluid reservoir and top up as necessary with brake fluid.
    Material: Brake Fluid - Super DOT4

206-05 Parking Brake and Actuation > < Brake Pads