Removal and Installation General Equipment Removal NOTE:Removal steps in this procedure may contain installation details. | -
CAUTION:Make sure that the brake pedal remains in the rest position. NOTE:The brake pedal actuating rod pin will be damaged during removal. Torque: 24 Nm | | -
Refer to: Battery (414-01, Removal and Installation). | | -
Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging (412-00, General Procedures). | | -
Refer to: Brake Master Cylinder - RHD (206-06, Removal and Installation). | | -
Refer to: Front Subframe (502-00, Removal and Installation). | | -
WARNING:Make sure that the engine and transmission assembly is on wooden blocks and secured with suitable retaining straps | Installation | -
CAUTION:Make sure that the brake booster pushrod is correctly located. To install, reverse the removal procedure. | | |