ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Timing Chain > < Camshafts

Mondeo 2007.5 (02.2007-)

Engine - 2.0L Duratec-HE (MI4) - Engine Front Cover Mondeo 2007.5 (02/2007-)
Removal and Installation

Materials
Name
Specification
Silicone Sealant
WSE-M4G323-A4
General Equipment
Trolley jack

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Remove the following items:
    1. Refer to: Headlamp Assembly (417-01A Exterior Lighting, Removal and Installation).
    1. Refer to: Crankshaft Pulley (303-01B Engine - 2.0L Duratec-HE (MI4), Removal and Installation).

  1. General Equipment: Trolley jack

  1. Torque: 15 Nm

  1. Torque: 25 Nm

  1. Torque: 25 Nm

Installation

  1. To install, reverse the removal procedure.

  1.  

  1. Torque:
    1-8 10 Nm
    9 48 Nm
    10-19 10 Nm
    20-22 48 Nm

  1.  
    1. Torque: 80 Nm
    1. NOTE:
      NOTE:Only tighten the bolts finger tight at this stage.
    1. Lower the jack.

  1. Torque: 90 Nm

Timing Chain > < Camshafts