ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

303-01D Engine - 2.5L Duratec (VI5) > < Engine Accessories
Engine - 2.3L Duratec-HE (MI4) - Specifications Mondeo 2007.5 (02/2007-)

Engine data

Description
Engine code SEBA
Firing order 1-3-4-2
Emission standard Stage IV
Bore 87.5 mm
Stroke 94 mm
Cubic capacity 2261 cm³
Compression ratio 10.6 : 1
Power output at 6500 rpm 118 kW (161 PS)
Torque at 1500 rpm 182 Nm
Maximum torque at 4000 rpm 208 Nm
Maximum engine speed (for a short period) 6675 rev/min
Maximum engine speed (continuous) 6450 rev/min
Idle speed 700 ± 50 rpm
Number of crankshaft main bearings 5
Camshaft drive Timing chain
Oil consumption 1 l/1000 Km

Engine oil

Viscosity/ambient temperature Type Specification
Recommended engine oil
SAE 5W-30 / below -20°C to over +40°C Ford Formula E WSS-M2C913-B
Alternative engine oils (for topping up only)
SAE 10W-40 / -20°C below -20°C to over +40°C Ford Formula XR+ ACEA A3/B3
SAE 5W-40 / below -20°C to over +40°C Ford Formula S/SD ACEA A3/B3

Capacities

Liters
Initial fill including oil filter 4.6
Service fill including oil filter 4.3
Service fill without oil filter 3.9

Lubricants, Sealants and Adhesives

Specifications
Sealant, oil pan contact surface to crankshaft rear seal retainer, oil pan to cylinder block, oil pan to front cover, engine front cover to cylinder block/ oil pan WSE-M4G323-A4
Oil pressure switch and engine front cover blanking plug sealant WSK-M2G349-A7

Valve Clearances

Description
Valve clearance (engine cold), intake 0,22 - 0,28
Valve clearance (engine cold), exhaust 0,27 - 0,33

303-01D Engine - 2.5L Duratec (VI5) > < Engine Accessories