Removal and Installation Special Tool(s) | 303-397 Remover/Installer, Hose Clamp | Materials Name Specification Silicone Sealant WSE-M4G323-A4 Removal NOTE:Removal steps in this procedure may contain installation details. | -
Refer to: Oil Pan (303-01G Engine - 2.2L Duratorq-TDCi (DW) Diesel, Removal and Installation). Refer to: Accessory Drive Belt (303-05F Accessory Drive - 2.2L Duratorq-TDCi (DW) Diesel, Removal and Installation). | | -
WARNING:Make sure that these components are installed to the noted removal position. Torque: Stage 1: 10 Nm Stage 2: 16 Nm | | -
NOTE:The gasket is to be reused unless damaged. Torque: 27 Nm | Installation | -
WARNING:Extreme cleanliness must be exercised when handling these components. To install, reverse the removal procedure. | | |