Removal Special Tool(s) | 303-122 Lifting Bracket, Engine | General Equipment Hose clamp remover/installer Hydraulic jib crane Mounting table set | - Remove the following items:
-
Refer to: Battery (414-01 Battery, Mounting and Cables, Removal and Installation). -
Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation). | | -
Refer to: Cooling System Draining, Filling and Bleeding (303-03F Engine Cooling - 2.2L Duratorq-TDCi (DW) Diesel, General Procedures). | | -
Refer to: Quick Release Coupling (310-00 Fuel System - General Information, General Procedures). | | -
Secure the power steering pump to one side. | | -
CAUTION:Gearshift cables must not be kinked or bent. | | -
CAUTION:If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water. | | - Remove the following items:
-
Refer to: Catalytic Converter (309-00F Exhaust System - 2.2L Duratorq-TDCi (DW) Diesel, Removal and Installation). -
Refer to: Front Drive Halfshafts (205-04 Front Drive Halfshafts, Description and Operation). -
Refer to: Front Subframe (502-00 Uni-Body, Subframe and Mounting System, Removal and Installation). | | -
Secure the (A/C) compressor to one side. | | -
WARNING:Make sure that the engine and transmission assembly is on wooden blocks and secured with suitable retaining straps. | | -
CAUTION:Make sure that no components catch when lowering the engine. Refer to: Lifting (100-04 Noise, Vibration and Harshness, Description and Operation). | | -
Refer to: Starter Motor (303-06F Starting System - 2.2L Duratorq-TDCi (DW) Diesel, Removal and Installation). Refer to: Generator - 2.2L Duratorq-TDCi (DW) Diesel (414-02 Generator and Regulator, Removal and Installation). | | |