ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Crankshaft Position (CKP) Sensor > < Intake Manifold Runner Control (IMRC) Actuator

Mondeo 2007.5 (02.2007-)

Electronic Engine Controls - 2.0L Duratec-HE (MI4) - Intake Manifold Tuning (IMT) Valve Mondeo 2007.5 (02/2007-)
Removal and Installation

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Detach the throttle body.
    Refer to: Throttle Body - 2.0L Duratec-HE (MI4) (303-04B Fuel Charging and Controls - 2.0L Duratec-HE (MI4)/2.3L Duratec-HE (MI4), Removal and Installation).

  1. Disconnect the actuator arm from the intake manifold tuning (IMT) valve.
    Torque: 2 Nm

Installation

  1. To install, reverse the removal procedure.

Crankshaft Position (CKP) Sensor > < Intake Manifold Runner Control (IMRC) Actuator