ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Front Muffler > < Exhaust System

Mondeo 2007.5 (02.2007-)

Exhaust System - 1.6L Duratec-16V Ti-VCT (Sigma) - Catalytic Converter Mondeo 2007.5 (02/2007-)
Removal and Installation

Materials
Name
Specification
Grease
SA-M1C9107-A

Removal

  1. Raise and support the vehicle.
    Refer to: Jacking (100-02 Jacking and Lifting, Description and Operation).
    Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation).

  1. CAUTION:
    CAUTION:Make sure that the exhaust flexible pipe is not forcibly bent.

  1. NOTE:
    NOTE:Make sure that the exhaust flexible pipe is not twisted.

Installation
  1. CAUTION:
    CAUTION:Jointing compound must not be used forward of the catalytic converter.
    NOTE:
    NOTE:Only tighten the nuts and bolt finger tight at this stage.

  1. NOTE:
    NOTE:Only tighten the nuts finger tight at this stage.
    Coat the studs with grease.
    Material: Grease

  1. Torque: 55 Nm

  1. CAUTION:
    CAUTION:Make sure that the exhaust flexible pipe is not forcibly bent.

  1. NOTE:
    NOTE:Make sure that the exhaust flexible pipe is not twisted.

  1. Torque: 24 Nm

  1. Torque: 24 Nm

  1. Torque: 47 Nm

  1. Torque: 60 Nm
  1. Lower the vehicle.

  1.  
    1. Torque: 10 Nm
    1. Torque: 48 Nm

Front Muffler > < Exhaust System