ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Diesel Particulate Filter (DPF) Differential Pressure Sensor > < Rear Muffler
Exhaust System - 1.8L Duratorq-TDCi (Lynx) Diesel - Diesel Particulate Filter (DPF) Mondeo 2007.5 (02/2007-)
Removal and Installation

Materials
Name
Specification
Grease
SA-M1C9107-A
General Equipment
Ford diagnostic equipment
Hose clamp remover/installer

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Raise and support the vehicle.
    Refer to: Lifting (100-04 Noise, Vibration and Harshness, Description and Operation).

  1. CAUTION:
    CAUTION:Make sure that the exhaust flexible pipe is not forcibly bent.

  1. General Equipment: Hose clamp remover/installer

  1. Torque: 20 Nm

  1. CAUTION:
    CAUTION:Make sure that the exhaust flexible pipe is not forcibly bent.
    Material: Grease
    Torque: 48 Nm

  1. Material: Grease
    Torque: 48 Nm

Installation

  1. To install, reverse the removal procedure.
  1. Carry out the powertrain control module (PCM) Reset the Diesel Particulate Filter Learned Values service function.
    General Equipment: Ford diagnostic equipment
  1. Carry out the powertrain control module (PCM) Reset the Diesel Particulate Filter Differential Pressure Sensor Learned Values service function.
    General Equipment: Ford diagnostic equipment

Diesel Particulate Filter (DPF) Differential Pressure Sensor > < Rear Muffler