ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Fuel System Bleeding - 2.0L Duratorq-TDCi (DW) Diesel > < Fuel System Pressure Check - 1.6L Duratec-16V Ti-VCT (Sigma)

Mondeo 2007.5 (02.2007-)

Fuel System - General Information - Fuel System Bleeding—1.8L Duratorq-TDCi (Lynx) Diesel Mondeo 2007.5 (02/2007-)
General Procedures

Special Tool(s)
310-110A
Hand Pressure Pump with Adapter Kit

310-110A-01
Adapter for 310-110A

  1. Refer to: Quick Release Coupling (310-00 Fuel System - General Information, General Procedures).

  1. Install the Special Tool(s): 310-110A, 310-110A-01

  1. Operate the hand pressure pump special tool adapter until the fuel filter is full and the special tool becomes firm.

  1. Refer to: Quick Release Coupling (310-00 Fuel System - General Information, General Procedures).
  1. CAUTION:
    CAUTION:The starter motor operation must not exceed 10 seconds at a time. After 10 seconds turn the ignition switch to position 0 and allow the starter motor to cool for 30 seconds before operating the starter motor again.
    Start the engine and allow it to idle until it reaches normal operating temperature.
  1. Switch off the engine.
  1. Remove the Special Tool(s): 310-110A, 310-110A-01

Fuel System Bleeding - 2.0L Duratorq-TDCi (DW) Diesel > < Fuel System Pressure Check - 1.6L Duratec-16V Ti-VCT (Sigma)