General Procedures | -
This procedure is required if a new proximity warning radar unit and, or proximity warning module are installed or if the proximity warning radar unit needed to be removed or is misaligned in its position due to another repair operation. | | -
Make sure that the vehicle is on level ground. | | -
Activate the adaptive speed control system and the system will automatically enter service alignment mode. | | -
The FOLLOW indicator on the information and message center will now be flashing, this indicates that the vehicle is in service alignment mode and requires driving. | | -
Carry out a road test to set the alignment of the adaptive speed control system. The following recommendations will assist in completion of the alignment process. | | |