| Removal and Installation Removal CAUTION:Make sure that the ignition key is removed. NOTE:Removal steps in this procedure may contain installation details. Vehicles with 2.0L engine Vehicles with 2.3L engine All vehicles | | -
Refer to: Accessory Drive Belt (303-05B Accessory Drive - 2.0L Duratec-HE (MI4)/2.3L Duratec-HE (MI4), Removal and Installation). | | | -
CAUTION:Take extra care not to damage the wiring harnesses. Torque: 15 Nm | | | -
NOTE:The following step is only required if a stud is loosened when the nut is removed. Torque: 47 Nm | Installation | | -
To install, reverse the removal procedure. | | 
