ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
501-14 Handles, Locks, Latches and Entry Systems > < Instrument Panel Console - Vehicles With: Digital Versatile Disc (DVD) Navigation System

Mondeo 2007.5 (02.2007-)

Instrument Panel and Console - In-Vehicle Crossbeam Mondeo 2007.5 (02/2007-)
Removal and Installation

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Remove the left and right-hand front door.
    Refer to: Tür (501-03, Removal and Installation).

  1. Refer to: Armaturenbrett - Fahrzeuge ausgestattet mit Manueller Temperaturregelung (501-12 Armaturenbrett und Konsole, Removal and Installation).

  1. Torque: 9 Nm

  1.  
    1. Torque: 9 Nm
    1. Torque: 25 Nm

  1.  
    1. Torque: 9 Nm
    1. Torque: 25 Nm

All vehicles

  1.  
    • On both sides.

  1.  
    • On both sides.

  1. Torque: 10 Nm

  1. Torque: 10 Nm

  1. Torque: 9 Nm

Vehicles without electric booster heater
  1. CAUTION:
    CAUTION:Make sure that all openings are sealed.
Vehicles with electric booster heater
  1. CAUTION:
    CAUTION:Make sure that all openings are sealed.
All vehicles
  1. Refer to: Grill - Windlauf (501-02 Vorderwagen - Anbauteile, Removal and Installation).

  1. Torque: 8 Nm

  1. Torque: 25 Nm

  1. NOTE:
    NOTE:Note the position of the component before removal.
    1. Torque: 80 Nm
    1. Torque: 25 Nm

  1. NOTE:
    NOTE:This step is only required when installing a new component.

  1. NOTE:
    NOTE:This step is only required when installing a new component.

  1. NOTE:
    NOTE:This step is only required when installing a new component.

Installation

  1. NOTE:
    NOTE:Make sure that this component is installed to the noted removal position.
    To install, reverse removal procedure

501-14 Handles, Locks, Latches and Entry Systems > < Instrument Panel Console - Vehicles With: Digital Versatile Disc (DVD) Navigation System