Removal and Installation General Equipment Flat-bladed screwdriver Round-ended steel rule Removal NOTE:Removal steps in this procedure may contain installation details. | -
Refer to: A-Pillar Trim Panel (501-05, Removal and Installation). | | -
Refer to: Headlamp Switch (417-01, Removal and Installation). | | -
Refer to: Steering Column (211-04, Removal and Installation). | | -
Refer to: Floor Console (501-12, Removal and Installation). | Vehicles without navigation system Vehicles with Travel Pilot EX | -
Refer to: Navigation System Display Module - Vehicles With: Travel Pilot EX (415-01, Removal and Installation). | All vehicles Vehicles with cordless cellular phone Vehicles with rear passenger entertainment system | -
Refer to: Digital Versatile Disc (DVD) Player (415-01, Removal and Installation). | Vehicles with glove compartment cooling All vehicles | -
CAUTION:The component must only be removed by pushing from behind. Release the clips and at the same time push on the back of the air bag module. -
| | -
NOTE:Note the position of the component before removal. | Installation | -
NOTE:Make sure that this component is installed to the noted removal position. To install, reverse the removal procedure. | |