ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Door Lock Cylinder > < Luggage Compartment Lid Latch

Mondeo 2007.5 (02.2007-)

Handles, Locks, Latches and Entry Systems - Ignition Lock Cylinder Mondeo 2007.5 (02/2007-)
Disassembly and Assembly

General Equipment
Flat-bladed screwdriver

Disassembly

NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Remove the ignition lock cylinder.
    Refer to: Ignition Lock Cylinder (501-14, Removal and Installation).

  1.  
    1. Ignition lock cylinder locking button leaf spring.
      General Equipment: Flat-bladed screwdriver
    1. Release the ignition lock cylinder clip.
      General Equipment: Flat-bladed screwdriver

  1. General Equipment: Flat-bladed screwdriver

  1.  
    • Make sure to read the key code from the key entry to the end of the lock barrel in sequence.
    • Make a note of the position and orientation of the ignition lock cylinder barrel tumblers.
    • One group of tumblers is signed with a one digit number (1 to 5), the other group of tumblers is signed with a two digit number (11 to 15).

Assembly

Door Lock Cylinder > < Luggage Compartment Lid Latch