Mustang L4-140 2.3L VIN A 1-bbl (1983)
Carburetor Float: Adjustments
Fig. 3 Float level adjustment. YF series carburetor
Fig. 3--Invert the air horn assembly, and check the clearance from the top of the float to the bottom of the air horn with the float level gauge. Hold the
air horn at eye level when gauging the float level. The float arm (lever) should be resting on the needle pin. Do not load the needle when adjusting the
float. Bend the float arm as necessary to adjust the float level (clearance). Do not bend the tab at the end of the float arm. It prevents the float from
striking the bottom of the fuel bowl when empty.