Mustang V6-3.8L VIN 4 (1998)
Alarm Module: Service and Repair
Removal and Installation
Anti-Theft System, Active
REMOVAL
1. Disconnect battery ground cable.
2. Open the luggage compartment door. Remove trim from LH side of luggage compartment.
3. Disconnect electrical connectors from anti-theft alarm control.
4. Remove anti-theft alarm control by pushing on the panel retaining tab below the anti-theft alarm control while sliding the anti-theft alarm control
down.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Test system for proper operation.
Anti-Theft System, Passive
