Mustang V6-3.9L VIN 6 (2004)
2. NOTE:
-
Be sure that each fitting is installed in the correct position on the folding top hydraulic component
-
Make sure that the tetra seal is installed in the bottom of each of the folding top hydraulic motor ports before attaching the hose fittings.
Install the hydraulic lines using a thread locker onto the motor assembly.
Hydraulic system
3. Bleed the hydraulic system.
4. Install the motor and cylinders as an assembly.
5. Position the motor assembly.
6. Connect the motor electrical connector.
7. Engage the hydraulic line retainers on each side.