Mustang V6-3.9L VIN 6 (2004)
Brake Switch (Cruise Control): Service and Repair
SWITCH - DEACTIVATOR
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the deactivator switch.
1
Disconnect the deactivator switch electrical connector.
2
Detach the lower deactivator switch hook.
3
Detach the upper deactivator pivot.
INSTALLATION
1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
To install, reverse the removal procedure.
-
Adjust the deactivator switch.