Mustang V6-3.9L VIN 6 (2004)
7. Disconnect the speed control actuator cable from the speed control servo pulley.
1
Gently push in the retaining spring.
2
Disconnect the speed control cable slug from the speed control servo pulley.
8. Remove the speed control servo.
1
Remove the bolts.
2
Remove the speed control servo.
INSTALLATION
1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
To install, reverse the removal procedure.