Mustang V6-3.9L VIN 6 (2004)
Radiator: Service and Repair
Radiator
Removal and Installation
NOTE: Radiator removal and installation is similar for both 3.8L and 3.9L and 4.6L vehicles. The art shown in the procedure is the 4.6L engine.
Mach I
1. Remove the air intake scoop.
All vehicles
2. Drain the engine cooling system.
3. Remove the radiator sight shield.
^
Release the clips.
4. Remove the fan blade, fan motor and fan shroud assembly.
5. Remove the upper radiator hose from the radiator.
6. NOTE: To avoid disturbing the transmission oil cooler fittings, use a backup wrench.
If equipped, remove the transmission lower cooler tube fitting.