Mustang V6-3.9L VIN 6 (2004)
Alignment: Service and Repair
Camber and Caster Adjustment
Front
Camber and Caster Adjustment - Front
All vehicles
1. Remove the rivet. Loosen the nuts and bolt.
Vehicles requiring camber adjustment
2. Move the front suspension camber adjusting plate to the required camber setting.
Vehicles requiring caster adjustment
3. NOTE: If caster adjustment is necessary to resolve a pull, or out of specification cross-caster split, then slotting the shock tower at the front shock
absorber upper mounting point is an acceptable method. This procedure should not be routinely performed with all alignments and only after all
other possible sources have been inspected and corrected as necessary.
Determine the amount of caster adjustment needed.
^
If no more than 0.6 degree is needed, only one shock tower needs to be slotted.
4. Mark the camber position of the front suspension camber adjusting plate.