Mustang V6-3.9L VIN 6 (2004)
Ignition Coil: Service and Repair
IGNITION COIL
REMOVAL
1. Disconnect the battery ground cable.
2. Disconnect the ignition coil electrical connector.
3. CAUTION: Spark plug wires must be connected to the correct ignition coil terminal. Mark spark plug wire locations before removing
them.
Twist while pulling upward to disconnect the spark plug wires.
4. Disconnect the accelerator cable retaining clamp from the ignition coil stud bolt.
5. Remove the bolts and the ignition coil.