Mustang V6-3.9L VIN 6 (2004)
Repairs and Inspections Required After a Collision: Service and Repair
Safety Belt Procedure After A Collision
SAFETY BELT PROCEDURE AFTER A COLLISION
WARNING: All safety belt assemblies include retractors, buckles, front seat belt buckle support assemblies (slide bar, if so equipped), shoulder
belt height adjuster (if equipped), child safety seat tether bracket assemblies (if equipped) and attaching hardware should be inspected after
any collision. Ford recommends new safety belt assemblies be installed unless a qualified technician finds the assemblies show no damage and
operate correctly. Safety belt assemblies not in use during a collision should also be inspected and new assemblies installed if either damage or
incorrect operation is noted.
1. Before installing a new safety belt assembly, the safety belt attaching areas must be inspected for damage and distortion. If the attaching points are
damaged and distorted, the sheet metal must be worked back to its original shape and structural integrity.
2. Install the new safety belt(s). Carry-out the Functional Test. See: Seat Belt Systems/Testing and Inspection/Component Tests and General
Diagnostics
