Mustang V6-3.9L VIN 6 (2004)
15. NOTE: 4.6L 2V shown; 3.8L and 4.6L 4V similar.
Remove the right engine mount cable harness bracket nut.
16. Remove the cover from the starter solenoid connections.
17. Remove the nuts and disconnect the starter solenoid electrical connections.
18. Pull the harness forward until it clears the motor mount, then remove the entire battery cable harness from the vehicle.
INSTALLATION
1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle needs to be driven to relearn the strategy.
To install, reverse the removal procedure.
