Mustang V6-3.9L VIN 6 (2004)
4. Remove the bolt and the parking brake cable bracket. Discard the bolt.
Vehicles equipped with a 4.6L 2V engine
5. Remove the stabilizer bar.
All vehicles
6. Support the differential housing with a jack stand.
7. Position the special tool 014-00942 under the rear lower suspension arm and bushing-to-axle pivot bolt.
8. Remove and discard the pivot bolt and nut.
9. Remove the spring (5560).
1
Slowly lower the arm with the special tool 014-00942.
2
Remove the rear spring and the rear spring insulators.
Installation
All vehicles