Mustang V6-3.9L VIN 6 (2004)
Pressure Plate: Service and Repair
REMOVAL AND INSTALLATION
Special Tools And Equipment
Special Tool(s)
Material
Material
1. Remove the transmission.
2. CAUTION: Loosen the bolts evenly to prevent clutch pressure plate damage.
NOTE: If the parts are to be reused, mark the clutch pressure plate and the flywheel.
Remove the bolts and remove the clutch pressure plate and the clutch disc.
Installation
NOTE: Clean the clutch pressure plate and flywheel with a commercial alcohol-based solvent so surfaces are free from oil film.
Do not use cleaners with a petroleum base. Do not immerse the clutch pressure plate in the solvent.
1. Position the clutch disc on the flywheel.
^
Using the special tool, align the clutch disc.