Mustang V6-3.9L VIN 6 (2004)
Seals and Gaskets: Service and Repair
Drive Pinion Seal
Special Tools And Equipment
Special Tool(s)
Removal
1. Remove the pinion flange.
2. Force up the metal flange of the rear axle drive pinion seal.
^
Install gripping pliers and strike with a hammer to remove the seal.
Installation
1. Lubricate the new rear axle drive pinion seal.
^
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
2. CAUTION: Installation without the proper tool can result in early seal failure.
CAUTION: If the rear axle drive pinion seal becomes misaligned during installation, remove it and install a new one.
