Mustang V6-3.9L VIN 6 (2004)
8. Cut the applicator tip to specification.
9. Apply a bead of Urethane Adhesive Essex 400-HV meeting Ford specification WSB-M2G316-B to the pinch weld.
10. CAUTION: Open a window to prevent the windshield glass from being pushed out by air pressure when a door is closed.
Using the alignment marks install the windshield glass.
11. After the glass is set, check for water leaks add urethane adhesive where needed.
12. Install the cowl grille.
13. Install the cowl grille weatherstrip.
14. Install the two windshield wiper pivot arms.
