Mustang V6-4.0L (2008)
Removal and Installation
1. Remove the sail panel.
-
If equipped, disconnect the exterior mirror control switch electrical connector.
2. Remove the interior door handle cover and the door trim panel bolt.
3. Remove the window control switch housing.
-
Disconnect the electrical connector.
4. Remove the door trim panel center screw.
5. Remove the door trim panel handle cover and the door trim panel bolt.
6. Remove the 8 outer door trim panel screws and the door trim panel.
-
Disconnect the interior door handle actuating cable.
-
If equipped, disconnect the subwoofer electrical connector.
7. To install, reverse the removal procedure.