Mustang V6-4.0L (2008)
Console: Service and Repair
CONSOLE - FLOOR
Removal and Installation
1. If equipped, remove the shift lever bezel.
2. Remove the 2 floor console finish panel screws.
3. Apply the parking brake and remove the floor console finish panel.
-
If equipped, disconnect the electrical connectors.
4. Disconnect the electrical connector to the powerpoint and audio input jack.
5. Remove the 2 center stack wings.
6. Remove the 2 front floor console screws.
7. Remove the mat, the 2 floor console nuts and the floor console.
8. To install, reverse the removal procedure.