Mustang V6-4.0L (2008)
Removal
NOTE: The convertible top hydraulic components are removed from the vehicle as an assembly. The hydraulic components are individually repaired
and the system must be bled before being installed into the vehicle.
Hydraulic system
1. Lower the convertible top.
2. Remove the rear seat backrest.
3. Remove the LH and RH quarter trim panels.
4. Momentarily place the convertible top switch in the raise position to release the tension on the convertible top system.
5. Remove the LH and RH L-bracket bolts and the LH and RH L-brackets.
NOTE: LH side shown, RH side similar.
6. Remove the LH and RH hydraulic lift cylinder bracket bolts and the LH and RH hydraulic lift cylinder brackets.