Mustang V6-4.0L (2008)
5. Disconnect the parking brake switch electrical connector.
6. Remove the 2 nuts from the parking brake control.
^
To install, tighten to 17 Nm (13 lb-ft).
7. Remove the 2 bolts from the parking brake control.
^
To install, tighten to 30 Nm (22 lb-ft).
8. Remove the parking brake control.
^
Position the cable and equalizer through the floorpan.
9. To install, reverse the removal procedure.
^
Adjust the parking brake cable tension.
