Mustang V6-4.0L (2008)
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the throttle body (TB). For additional information, refer to Fuel Delivery and Air Induction.
3. Remove the front end accessory drive (FEAD) bracket bolt and install the special tool.
^
To install, tighten to 48 Nm (35 lb-ft).
4. Remove the 6 pin-type retainers and the radiator sight shield.
5. Install the special tools.
6. Remove the engine mount bracket-to-engine mount nut.
^
To install, tighten to 63 Nm (46 lb-ft).
7. Remove the 3 engine mount bracket bolts and remove the bracket.
^
To install, tighten to 80 Nm (59 lb-ft).
8. Remove the 2 engine mount bolts and the engine mount.
^
To install, tighten to 70 Nm (52 lb-ft).
9. To install, reverse the removal procedure.
Engine Mount - RH
Engine Mount - RH
