Mustang V6-4.0L (2008)
5. Remove the 6 pin-type retainers and the radiator sight shield.
6. Install the special tools.
7. Remove the engine mount-to-engine bracket mount nut.
^
To install, tighten to 63 Nm (46 lb-ft).
8. Remove the 4 engine mount bracket bolts and remove the bracket.
^
To install, tighten to 80 Nm (59 lb-ft).
9. Remove the 2 engine mount bolts and the engine mount.
^
To install, tighten to 70 Nm (52 lb-ft).
10. To install, reverse the removal procedure.