Mustang V6-4.0L (2008)
Removal and Installation
NOTE:
-
The heater core and evaporator core are not individually serviced. They are serviced only with the heater core and evaporator core housing.
-
If a heater core leak is suspected, the heater core must be leak tested before it is removed from the vehicle.
-
Installation of a new suction accumulator is not required when repairing the A/C system except when there is physical evidence of contamination
from a failed A/C compressor or damage to the suction accumulator.
5.4L (4V) vehicles
1. Release the fuel system pressure.
All vehicles
2. Recover the refrigerant.
3. Drain the engine coolant.
4. Remove the instrument panel.
5.4L (4V) vehicles
5. Remove the supercharger.
6. Disconnect the heater hose fittings at the rear of the RH cylinder head and position the heater hoses aside.